昆山DG245H3-7.5

认证(APPROVAL)

测试标准(Test standard)

IEC60947-7-4/   UL1059

产品间距(Pitch)                                      [mm]

7.5

极数(Poles)

06-XXP

IEC60947-7-4测试数据（  IEC60947-7-4 Test data) 

/

额定电压(Rated voltage)                              [V]

630

额定电流(Rated current)                              [A]

21

额定连接容量(Rated connection capacity)(solid/stranded) [mm2]

0.2-2.5

过压类别/污染等级/绝缘材料组别

(Surge voltage category/pollution degree/material group)

III/2/I

额定冲击耐压(Rate impulse Voltage)              [KV/min]

6.0

额定扭矩(Rated torque)                               [N·m]

/

UL1059测试数据（UL1059Test data)

UL   File Number E228872

应用组别(Use group)

B

C

D

额定电压(Rated voltage)                              [V]

300

/

300

额定电流(Rated current)                              [A]

10

/

10

额定连接容量(Rated connection capacity) (solid/stranded) [AWG]

28-12

额定扭矩（Rated torque）                            [Lb. in]

/

通用数据(General data)

螺丝(Screw)

/ 

阻燃等级(Inflammability class)UL94

V-0

环境温度(Ambient temperature)                          [℃]

-40~+105

相对湿度(Relative humidity)

5%-95%

抽样检验标准(Inspection standard）

MIL-STD-105E   II

允收水准(AQL)

0.65

保质期(Warranty)

12   months

材质和电镀(Material and plating)

/

绝缘材质(Housing)

PA66

螺丝(Contact)

/

触点材料(Contact)

Copper alloy，Sn plated铜合金，镀锡

弹片（Spring）

Stainless   steel 不锈钢

推荐剥线长度5-6mm; Recommended stripping length 5-6mm;

1.）单股硬导线，剥好对应长度的导线后，用辅件压下弹片后将导线插入进线孔；

solid wire: After stripping corresponds to   the length of the wire , put the wire into the hole

after using the accessory depress the cage   spring ;

2.）多股柔性导线，剥好对应长度的导线后，可以直接连接或者配套使用对应标准规格的

冷压端头，用辅件压下弹片后将导线插入进线孔；

strand wire :After stripping corresponds to   the length of the wire, can be directly connected

or use of the corresponding standard   insulated ferrule , then put the wire into the hole after

using the accessory press the cage spring ;